Sp Flash Tool Mt6765 Jun 2026

A red bar will appear (Download DA), followed by a yellow bar showing the actual flashing progress.

For most advanced users and technicians, SP Flash Tool remains the most reliable and widely supported option for MT6765 devices. However, when SP Flash Tool fails due to Secure Boot or driver issues, MTKClient provides a powerful fallback.

: Wipe the storage partitions clean or remove persistent screen locks. sp flash tool mt6765

Boot loop after flash:

If both above fail, locate the test points on the MT6765 motherboard and short them while connecting USB. This forces BROM mode (unauthenticated). A red bar will appear (Download DA), followed

Yes, if the manufacturer released it. Never cross-flash firmware from a different device – even with the same MT6765.

| Error Code | Meaning | Fix on MT6765 | |------------|---------|----------------| | STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005) | DA rejected by BROM | Use newer DA (e.g., MTK_AllInOne_DA_v5.2424.bin ). | | S_BROM_DOWNLOAD_DA_FAIL (0x7D4) | USB timing issue | Use USB 2.0 port, short USB cable, disable USB 3.0. | | STATUS_SEC_AUTH_FILE_NEEDED (0xC0030011) | Auth file required | Enable “Download Only” + “Skip Auth” in Options → Security. | | S_FT_ENABLE_DRAM_FAIL (0xFC0) | DRAM init failed | Reflash preloader via BROM (test point method). | | S_DL_GET_DRAM_SETTING_FAIL (0x3F2) | Incorrect scatter file | Ensure MT6765_Android_scatter.txt matches exact chip revision. | : Wipe the storage partitions clean or remove

: Required for your Windows PC to communicate with the phone in DA (Download Agent) mode.

Common commands for MT6765:

Navigate to the SP Flash Tool folder and run flash_tool.exe as administrator (right-click the file and select "Run as administrator").