Resetter Printer Canon G2010 Updated -

To help you get your printer back online quickly, let me know the specific issue!

In most countries, performing a maintenance reset does not void the warranty unless the act of resetting (or failing to service the physical pad) causes physical damage to the printer.

A small pop-up box saying "A function was finished" should appear. Click OK .

A (sometimes called a "service tool" or "WIC resetter") is a small software program that communicates directly with your printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). It forces the waste ink counter back to zero.

The printer completely refuses to print, scan, or copy. Phase 1: Entering Service Mode (Crucial Step) resetter printer canon g2010

If the manual method fails, you need the (e.g., v4905, v5103, or newer).

Release both buttons. The green power light will flash and then stay steady. Reset the Waste Ink Counter Once in Service Mode (steady green light), press the to confirm the command.

The green power light will flash for a few seconds and then stay solid. The printer screen will go completely blank. If the screen is blank and the power light is steady green, you have successfully entered Service Mode.

Turn off the printer and turn it back on. The error should be gone. Alternative Reset Methods WIC Reset Utility To help you get your printer back online

Canon Service Tools only run natively on Windows operating systems (Windows 7, 8, 10, or 11). They do not work on macOS.

Click the Set button located directly to the right of the Absorber dropdown.

Before attempting a reset, it is important to understand why the printer stops. The Canon G2010 uses a built-in counter to track the amount of ink flushed into the absorbent waste ink pads during cleaning cycles and borderless printing. Once this counter reaches a predetermined limit, the printer locks itself to prevent an overflow that could leak ink inside the machine, causing damage. The error is a safety mechanism, not a malfunction. Consequently, resetting the counter does not physically clean or replace the pads; it only tells the printer’s memory that the pads are "empty" again.

Before you can use the resetter software, you must put your printer into a special state called Service Mode. The software cannot talk to your printer without this step. Click OK

The mainboard logic circuit might be damaged. If a printer fails to stay turned on during service mode, it usually indicates a hardware defect rather than a simple counter issue.

Many free and paid resetter tools, such as the popular third-party WIC Reset Utility, are primarily designed for the Windows operating system. You can still use them on a Mac by using virtualization software like Parallels, VMware Fusion, or the free Boot Camp assistant to run a Windows environment on your Mac. If you choose this route, ensure the virtual machine is set up to properly recognize and communicate with your printer over the USB connection.

Before you can use any software resetter, you must manually boot the Canon G2010 into . If the printer is not in Service Mode, the resetter software will not recognize it.

Before you begin any reset operation, it is crucial to know what you are dealing with. The Canon G2010 will display specific error messages or support codes indicating that the internal waste ink counter is full.