Since this is a standard multi-mode wireless mouse, you can follow these steps to connect: 2.4G Wireless Mode (USB Dongle) Locate the USB receiver

Press and hold the pairing button (sometimes a dedicated button or a combination of DPI + side buttons) for 3–5 seconds until the LED flashes.

If you have arrived here searching for the , you are not alone. Thousands of users lose their paper manual or receive a mouse without one. This article serves as your complete resource. Below, you will find the direct links to the manual, a step-by-step setup guide, troubleshooting tips, and answers to frequently asked questions.

If your mouse doesn't work immediately after turning it on, it likely needs to be paired with its receiver. The following is a common pairing process, as described in a standard guide for this type of mouse:

Locate the USB dongle, often stored in a compartment on the bottom of the mouse.

Turn the mouse on and immediately hold the and Scroll Wheel simultaneously for 3 seconds. Plug the receiver back in. Driver Links & Firmware

Arthur hesitated. Then he clicked.

Toggle the switch at the bottom of the mouse to the position.

Locate the 2.4GHz USB Nano receiver. It is usually stored in a slot on the bottom of the mouse near the battery compartment.

Locate the USB receiver (dongle) stored in the compartment on the bottom of the mouse. Plug the receiver into your computer's USB port.

: Plug the receiver into an available USB port on your PC or laptop.

Visit the Pangyingo Support Center for the latest PDF manuals.

A: Yes. All Pangyingo rechargeable models support pass-through charging. You can continue working while the USB cable is connected.

Insert the USB receiver into an available USB port on your computer or laptop.

I can locate the exact driver download or specific button configuration manual for your device. Share public link