Fanuc Series Oitf Plus Programming Manual [2021] Page

Unlike older systems restricted to four-digit 'O' numbers, the 0i-TF Plus supports alphanumeric names up to 32 characters long, improving file organization for shops with high part variety. 0i-TF Plus | FANUC Global

: Aligns parallel with the machine spindle centerline.

On the 0i-TF, tools are selected using the T address.

T0202 (FINISH TURN TOOL) G96 S600 M03 G00 X2.2 Z0.1 M08 G70 P100 Q200 Use code with caution. G76: Multiple-Thread Cutting Cycle fanuc series oitf plus programming manual

: Traditionally, programs are named with an "O" followed by a four-digit number (e.g., O1234 ). The Plus series is the first in its class to support 32-character alphanumeric names , allowing for more descriptive file management (e.g., FLANGE_REV_A_OP10 ).

P0400 : Depth of the thread profile (radius value, 400 ten-thousandths or 0.040"). Q0120 : Depth of the very first cut pass.

The control follows standard ISO programming, though the manual outlines subtle differences across G-code systems A, B, and C (with System A being the default for standard turning). Description Rapid Positioning Moves axes at maximum machine traverse speed. G01 Linear Interpolation Moves axes in a straight line at a specified feed rate ( G02 / G03 Circular Interpolation Executes clockwise or counterclockwise arcs. G50 Maximum Spindle Speed Unlike older systems restricted to four-digit 'O' numbers,

The FANUC 0i-F Plus features an upgraded hardware platform designed for high-speed processing and seamless user interaction. Understanding the interface and system setup is the first step to successful programming.

Multiple-thread cutting cycle for accurate, multi-pass threading operations. 4. Advanced Macro Programming (Macro B)

To fully utilize the 0i-TF Plus, the programming manual should be used alongside several other official documents: T0202 (FINISH TURN TOOL) G96 S600 M03 G00 X2

Procedures for taking X and Z offsets using "Measure" functions.

: Provide a reference list of "Fixed Form" sentences (standardized startup/shutdown blocks) that can be inserted with one touch to set maximum spindle speeds, coolant, and tool change positions. Smart Parameter Tuning Guide

The "Plus" series introduces several technologies that improve both the programming experience and final part quality: Fast Cycle-time Technology: