Open the extracted folder, find , right-click it, and select Run as Administrator . Phase 2: Interface Configuration Click on the Mode Select tab in the main dashboard window.
Check the boxes for and IMEI 2 (if applicable). Carefully type your official 15-digit identification numbers into the corresponding input fields. Double-check your entry against your retail box documentation to eliminate typos. Step 4: Establish the Device Connection
Type the second valid 15-digit number into the input field (if applicable). Step 4: Connecting the Device Click the Start or Write button on the tool interface. Turn off your mobile device completely. spreadtrum imei tool v41 updated
Hold down the or Volume Up button (this acts as the hardware Boot Key for SPD devices).
: Can also update and repair Bluetooth addresses, Wi-Fi addresses, and Serial Numbers (SN). How to Use Spreadtrum IMEI Tool v4.1 Open the extracted folder, find , right-click it,
: Type the 14 digits of the original IMEI into the provided fields; the tool will typically auto-generate the 15th checksum digit. Connect the Device : Power off the device.
Complete Guide to Spreadtrum IMEI Tool v4.1 (Updated Version) Step 4: Connecting the Device Click the Start
Turn off your mobile device completely. Hold down the device’s volume down button (the default boot key for most Spreadtrum devices) and connect it to your PC via the USB cable.
The tool will detect the device and begin flashing the identification parameters. Once completed, a green or Success notification will appear on the screen. Disconnect the phone and reboot it. Troubleshooting Common Errors Device Not Detected
: Capable of writing Bluetooth (BT), Wi-Fi (WLAN), and Serial Number (SN) addresses.
Which is running on your computer?
Powered by Discuz! X3.4© 2001-2023
