The will turn on once the machine is hot enough.
Once the pouch has fully exited, place it on a flat, cool surface. For the best results, place a heavy book on top of it for 2–3 minutes. A hot laminate is still pliable and can warp if not allowed to cool flat.
The original manual emphasizes that laminators fail most often due to adhesive buildup. Follow these monthly cleaning steps:
At first glance, the Staples 17466 seems self-explanatory: plug it in, wait for the light, insert pouch. However, without the original , users commonly make three mistakes: staples 17466 laminator manual
Staples Thermal & Cold Laminator, 9" Width (5738801/5738802) Go to product viewer dialog for this item.
Always feed the sealed end of the pouch into the machine first. This prevents air bubbles and reduces the risk of jamming.
Bookmark this article. Print it out and tape it to the bottom of your laminator. You’ll never need to hunt for the original Staples 17466 manual again. The will turn on once the machine is hot enough
Ensure the laminator is on a flat, heat-resistant surface with enough room for the document to exit without being obstructed.
Illuminates when the machine reaches the correct operating temperature. 📋 Step-by-Step Operating Instructions
Wait until the red light turns GREEN . Do not feed any pouch while the light is red. A hot laminate is still pliable and can
Unplug the machine and allow it to cool completely before storing it vertically or horizontally. Troubleshooting Guide
Optimized temperature for standard documents using 3-mil pouches.
Plug the unit into a standard electrical outlet and turn it on.
Wait 3 to 5 minutes. The "Ready" indicator light will turn green once the rollers reach the correct operating temperature.