Dishwasher Service Manual | Miele G1220

The Miele G1220 is a premium, German-engineered dishwasher known for its longevity and exceptional cleaning performance. However, like any appliance, it can encounter operational issues over time. Accessing and understanding the is the key to diagnosing faults, understanding error codes, and executing safe DIY repairs.

The Miele G1220 has a width of 598 mm, a height of 810 mm, and a depth of 570 mm. It weighs between 58 kg and 66 kg depending on the specific configuration. The wash cabinet capacity is 12 place settings, and the dishwasher consumes approximately 1.05 kWh of energy per standard cycle. Water consumption per cycle is approximately 10 litres per wash cycle.

Turn the dishwasher completely using the main Power button. Open the door. Press and hold the Start/Stop button.

In addition to paid manuals, . This document covers manuals in languages such as English, Italian, French, Spanish, and German. miele g1220 dishwasher service manual

This is one of the most frequently reported errors on the G1220 series. F14 can be triggered by several conditions, including a defective pump pressure level switch (B1/13), a circulation pump that is not running, insufficient pump pressure due to foreign objects, a defective flow meter (B3/4) that measures water volume incorrectly, a defective circulation pump winding or motor, or a pump pressure level switch that has not opened contacts 11-12 and 21-22 after the water intake step. According to one Miele representative, this issue can sometimes occur when the dishwasher is used infrequently (less than once per week), and pouring approximately one litre of hot water into the base of the machine may temporarily resolve a stuck valve.

The unit is approximately 81 cm high for fully built-in setups, or 85.5 cm with a usable top panel.

Remove the bottom filter combination. Pull up the metal clamp securing the non-return valve (located next to the filter). Check the pump impeller for foreign objects like glass shards or fruit pits. Ensure the drain hose is not kinked. F12 / F13 (Water Intake Fault) The Miele G1220 is a premium, German-engineered dishwasher

The flow meter (impeller sensor) failed to detect the required volume of water entering the drum within the calibrated time frame (usually 2-4 minutes). Service Manual Resolution: Check for a clogged inlet valve filter screen.

A3: Use your full model number (e.g., G1220 SCU) to search on specialized parts websites like buyspares.fr, through Miele's after-sales service, or from authorized dealers.

Carefully separate the outer door panel from the inner panel. The Miele G1220 has a width of 598

To access the circulation pump, drain pump, and heating element, you must access the bottom of the appliance:

To access the diagnostic menu on the G1220, follow this precise programming sequence:

The service manual includes parts diagrams and part numbers for all major components. Understanding these part numbers can be helpful when ordering replacement components.

120V AC (North American models) / 230V AC (European models), 60Hz/50Hz. Water Pressure Requirement: 0.3 to 10 bar (4.3 to 145 PSI).

The machine beeps shortly after starting a cycle, and the "Inlet/Drain" LED flashes.