Xprinter Xp420b Wifi Setup Site

The printer will print a self-test page. Look for the under the WiFi/Network section to confirm it has connected to your router 1.2.2. Phase 4: Installing the Network Printer Driver Open Control Panel > Devices and Printers on Windows. Click "Add a printer" .

Connect the power cable and flip the power switch at the back to the "On" position.

Before you start, it's helpful to understand two key technical terms that you will encounter during this process: DHCP and Static IP . xprinter xp420b wifi setup

Connect your phone or tablet to the as the printer.

(Optional) Set a static IP address to prevent it from changing later (e.g., 192.168.0.110 Save & Restart The printer will print a self-test page

A standard USB cable (included in the box) to link the printer to the PC temporarily.

That’s it! The Wi-Fi settings are now saved on your XP-420B. Click "Add a printer"

Ensure the WiFi password is correct and that the router is operating at 2.4GHz, not 5GHz, as many thermal printers only support 2.4GHz.

Before you begin the setup process, make sure you have the following:

Alternative: Setting Up Wi-Fi Direct (For Direct Mobile/PC Connection)