Tap on 7 times until it says "You are now a developer". Go back to Settings > System > Developer Options . Toggle on USB Debugging .
fastboot reboot
While on the "No command" screen, press and hold the .
Open Device Manager on your Windows PC. Look for an exclamation mark next to Android or MTK drivers. Download and reinstall the official Google USB Drivers or MediaTek Fastboot Drivers, then restart your PC. 3. Stuck on the Fastboot Screen
In the Command Prompt window, type the following command to verify your computer recognizes the phone: adb devices Use code with caution. how to open fastboot mode on tecno spark 6 go
Go back to Settings > System > Developer Options and toggle on USB Debugging . Step 2: Connect to the PC
You will see a confirmation screen on your phone. Use the Volume keys to select "YES" and press the Power button to confirm.
You will see an Android mascot lying down with an exclamation mark, displaying the text Step 3: Trigger the Recovery Options
Click on the address bar at the top of the file explorer window, type , and hit Enter to open a Command Prompt inside that folder. Tap on 7 times until it says "You are now a developer"
Before you begin, ensure you have the following to avoid issues:
This guide provides a comprehensive, step-by-step walkthrough on how to enter Fastboot mode on your Tecno Spark 6 Go What is Fastboot Mode?
Fastboot Mode is a powerful diagnostic protocol for Android devices. It allows you to modify your phone's system image directly from a computer.
button to confirm your selection. Your device will restart into Fastboot Mode. ADB Method (Using a Computer) If your device is powered on and has USB Debugging enabled in Developer Options , you can use a computer to enter this mode: Connect your phone to a PC with a USB cable. Open a command prompt or terminal in your Android Platform Tools Type the following command and press Enter: adb reboot bootloader How to Exit Fastboot Mode Fastboot Mode TECNO Spark 6 Go - HardReset.info fastboot reboot While on the "No command" screen,
Connect your Tecno Spark 6 Go to your computer using your micro-USB cable.
To open Fastboot on Tecno Spark 6 Go, simply Power Off the device, then press and hold Volume Down + Power until the Fastboot logo appears.
If you are looking to fix issues like a boot loop, you may also need to know how to hard reset the Tecno Spark 6 Go .
Once you have finished your tasks in Fastboot Mode, you can exit the menu and return to the normal Android system using two different methods: Method A: Manual Hardware Exit
: Release the Power button as soon as the "TECNO" logo appears on the screen, but continue holding Volume Up .
Press . Your phone will immediately turn off and boot into Fastboot Mode. Method 3: Using Third-Party Apps (Root Required)