Wella Climazon Millenium Manual Install

Carefully open the shipping boxes. Layout the components on a padded surface to prevent scratching the high-gloss casing.

This guide provides a comprehensive walkthrough for installing the Wella Climazon Millennium Go to product viewer dialog for this item.

Wipe the plastic housing and infrared sensors with a soft, damp microfiber cloth. Never use alcohol, ammonia, or abrasive chemical cleaners. wella climazon millenium manual install

Determine the ideal mounting height. The pivot point of the arm should typically sit between 1.8 meters and 2.0 meters (70–78 inches) from the finished floor.

Tighten the primary hex locking bolt, then engage the secondary safety split-pin. Carefully open the shipping boxes

Insert heavy-duty steel expansion anchors and bolt the wall bracket tightly.

Insert the five smooth-rolling casters into the base legs. Push firmly until they click into place. Ensure at least two locking casters are positioned where you can easily reach them with your foot. Wipe the plastic housing and infrared sensors with

The manual controls are on the side panel. No digital programming is needed for basic install.

Measure from the finished salon floor upward. The standard recommended height for the bottom of the wall bracket is .

This critical step must be performed by a .