Adjustment Program Epson 1390 Resetter Fixed | Free |

If you own an (or its sibling, the R1410), you know the feeling of dread. You’re in the middle of a high-quality photo print on A3+ paper. The colors are perfect, the detail is sharp, and then— it happens .

A pop-up window will prompt you to turn off your printer. Press the physical power button on your Epson 1390 to switch it off, then click on the computer screen. Another prompt will tell you to turn the printer back on. Switch the printer back on, and the flashing red lights should disappear. Crucial Hardware Maintenance Advisory

The counter read:

The printer relies on a digital counter (Waste Ink Pad Counter) to estimate when these pads are full.

Inside your printer, there is a spongy absorbent pad. Every time you clean the print head (either manually or automatically), a small amount of ink is flushed through the nozzles to unclog them. This waste ink doesn’t evaporate; it drips down into the waste ink pad.

The Epson Adjustment Program is a proprietary service utility (leaked from authorized service centers) that allows you to reset the internal waste ink counter. It is a driver or a regular software utility. It is a low-level tool that communicates directly with the printer’s EEPROM (memory chip).

Every time your printer cleans its printhead or primes the ink system, a small amount of ink is directed into internal absorbent pads. Epson programs a digital counter into the printer's firmware to estimate when these pads are full. Common Signs Your Printer Needs a Reset The red ink and paper lights flash alternately. Your computer displays a "Service Required" error message.

To ensure the Epson 1390 adjustment program fixes your printer without any errors (such as communication errors or freezing), complete these preparatory steps:

Downloading random EXE files from the internet is risky. Ensure your antivirus is temporarily disabled (the "fixed" patcher often triggers false alarms). Ideally, use an old Windows 7 laptop or a virtual machine.

Click on the button located on the right side of the main window. This opens a comprehensive list of maintenance utilities. Step 4: Locate the Waste Ink Pad Counter

This means the software cannot talk to the printer. Check your USB connection, make sure the printer is turned on, and ensure you selected the correct USB port in the software settings.