Align the rear slots of the printer cabinet with the bracket pins.
Maintain at least 100 mm (4 inches) of clearance around the cooling vents of the printer cabinet to prevent overheating. 2. Unboxing and Component Inspection
Once mechanical and electrical connections are secure, navigate the user interface for initial priming.
Close the compartment door. The SIMPLICIty™ interface will update to show current fluid levels. 5. System Wiring and I/O Integration
Ensure the main power switch is in the "Off" position.
Select Fixed Speed (enter meters/minute manually) or Encoder (enter pulses per mm).
Secure the printer base to the official Videojet stand using the provided bolts.
The printhead is mounted too far from the substrate, or the production line speed does not match the printer's internal delay settings.
Insert the correct Videojet ink cartridge into the left slot until it clicks.
After moving the printer, or every 6 months for stationary installs. Check fluid levels, grounding, and printhead alignment.
According to the Videojet 1280 Operator Manual and Technical Training Guide , standard installation involves several critical checks:
Ensure the printhead is perpendicular to the substrate, with a distance of roughly from the product.
Check that the makeup and ink cartridges are properly installed. Power On: Turn on the printer using the main power switch.
: For optimal jetting, ensure the printhead is level with the umbilical exit and set elevation to "zero" in the printer settings menu.
With the manual in hand, you are now ready to begin the physical installation of your Videojet 1280 printer.