Srps En 13670

While focused on normal and heavyweight concrete, it also offers guidance for lightweight aggregate concrete and structures using special technologies or innovative designs. What it does NOT cover:

The factory-based making of precast elements is covered by specific product standards.

For engineers, contractors, and investors in Serbia, is the "bible" for construction site operations. Compliance with this standard ensures:

Since Serbia is an EU candidate country, the adoption of EN standards (as SRPS) is actively encouraged. The (Zakon o planiranju i izgradnji) requires that all constructions meet technical requirements. The most direct way to prove compliance is to follow harmonized technical standards. srps en 13670

The standard provides two classes of tolerances (Class 1 and Class 2). These define the acceptable "deviations" in the final structure's dimensions—such as the verticality of columns or the thickness of slabs—to ensure the building remains safe and functional.

It is equally important to know what lies outside its scope:

SRPS EN 13670 applies to the execution of both permanent and temporary concrete structures. It covers ordinary concrete, reinforced concrete, and prestressed concrete elements. Inclusions Buildings, bridges, tunnels, and civil engineering works. Cast-in-place (monolithic) concrete operations. Precast concrete element installation. Site-mixed and ready-mix concrete application. Exclusions While focused on normal and heavyweight concrete, it

Do you need this content translated or adapted into ? Share public link

It is essential to understand the relationship between these two standards:

A critical feature is its clear definition of quality management responsibilities. The three primary types of documents defined are: Compliance with this standard ensures: Since Serbia is

This section defines . Depending on the complexity and importance of the structure, projects are assigned a class (typically 1, 2, or 3). Higher classes require more stringent quality management, documentation, and inspection. Formwork and Falsework

Serbia, through its Institute for Standardization (ISS), adopted this European standard as a national standard in two significant steps:

Институт за стандардизацију Србије