Epson L130 Adjustment - Program Reset Tool

A: No. The Adjustment Program only addresses service-required counters. Paper and ink errors are sensor-based.

: Locate and run the AdjProg.exe file as an administrator.

To ensure the program works successfully without communication errors, verify the following: Operating System : The software runs strictly on Connection Type : The printer must be connected directly via a . Network, Wi-Fi, or print-server connections will fail. Pending Print Jobs

You can resolve this issue yourself using the (also known as the Epson AdjProg reset tool). This guide explains what the tool does, how to use it safely, and how to reset your printer's waste ink pad counter back to 0%. Understanding the "Service Required" Error epson l130 adjustment program reset tool

The tool works at a very low level. It communicates directly with the printer's firmware (the software embedded in the printer's hardware) through a USB HID protocol, which allows it to read and write precise values to the printer's EEPROM (the memory chip that stores usage data). This capability makes the tool exceptionally powerful, but it also means that using it incorrectly carries the risk of damaging your printer, as it has the ability to alter fundamental settings.

| Risk | Consequence | |------|-------------| | | Resetting counter without cleaning/replacing physical pad causes ink leakage → damages printer and surroundings. | | Firmware mismatch | Using wrong version of adjustment program may corrupt EEPROM → permanent brick. | | Counter lock | Some firmware versions prevent reset after 2–3 overflows → mainboard replacement needed. | | Security software | Antivirus may flag the tool as “hacktool” – false positive due to low-level hardware access. | | USB communication error | Incorrect driver or cable can cause “Communication Error (Code 200000xx)” – requires driver reinstall. |

The interface is archaic. It looks like software from the late 1990s. : Locate and run the AdjProg

Click the button on the right side of the screen.

The hardware pads may need physical inspection, but the electronic lock requires a software reset. The official software used by technicians to clear this counter is the (also known as the Epson AdjProg). Step-by-Step Guide to Resetting the Waste Ink Pad Counter Follow these precise steps to unlock your printer. Step 1: Preparation

The tool locates the counter addresses, computes replacement values (often zero or a smaller number), and writes them back. Some versions include a GUI to guide users through steps: entering service mode, selecting the target counters, performing the reset, and restarting the device. Pending Print Jobs You can resolve this issue

| Component | Specification | |-----------|----------------| | | Windows 7, 8, 10, 11 (32/64-bit) | | Interface | USB 2.0 (Type A to B) | | Driver | Epson L130 printer driver installed | | Printer State | Powered on, in “Service Required” error mode (flashing lights) | | Software Type | Standalone executable (.exe) – not an official Epson download |

The (available from third-party sources) lets you reset the counter without replacing the pads—provided you manually redirect waste ink or ensure the pads aren’t fully saturated.

Over time, these pads fill up, and the printer stops functioning, displaying a error. This guide provides a comprehensive overview of the Epson L130 Adjustment Program (also known as the Epson Resetter Tool), explaining how to use it safely to revive your printer. Understanding the "Service Required" Error

The adjustment program requires a Windows environment. It will not run natively on macOS or Linux.

Allows advanced users to read, backup, and write EEPROM data.