Change the batteries once every 12 months, even if the low battery indicator hasn't started flashing.
Programming your thermostat can lower your energy bills by automatically adjusting temperatures when you are asleep or away from home. Most Intronics models offer a 5-2 schedule (Weekdays vs. Weekends) with four distinct time periods per day. The Four Daily Time Periods Your morning wakeup temperature.
Set your bedtime hours and overnight energy-saving temperature. Press the Power button or wait 10 seconds to save and exit. 4. Advanced Settings and Calibration
Press again, then adjust the desired target temperature for Period 1. Repeat these steps for the remaining daily periods:
Some Intronics models have an external floor sensor. To set max floor temp: intronics digital room thermostat user guide
This device is an electronic temperature controller designed to replace older mechanical thermostats. It provides precise temperature control for central heating systems.
Set Period 2 (Daytime): Choose a lower energy-saving temperature for when you are away (e.g., 16°C at 08:30).
Repeat the process to set your away time and a lower efficiency temperature.
Press the Power/On-Off button to toggle the system. When turned on, the unit typically resumes the last programmed settings. Adjusting Temperature: Use the Up ( △triangle ) and Down ( Change the batteries once every 12 months, even
The current mode will flash on the display.
A: Most models have a backlight that turns on for 10 seconds after a button press. If it stays on, you may have a “continuous backlight” setting enabled. Turn it off in advanced menu (look for “BL” or “LIGHT”).
) is a sophisticated, yet user-friendly device designed to control fan coil units in air conditioning systems. Combining modern design with reliable functionality, these thermostats offer precise temperature management for residential and commercial environments.
Even reliable digital thermostats can act up. Here are solutions to frequent problems. Weekends) with four distinct time periods per day
A: Line-voltage (120-240V) has thick red/black wires and says “max 16A.” Low-voltage (24V) has thin multi-colored wires. If unsure, consult an electrician.
This temporary change will automatically cancel when the next scheduled time period begins. Using the Hold Feature
: Indicates the heating system is actively running.
If you adjust the temperature during a scheduled program, the thermostat will stay at that temperature until the next scheduled time block begins.
: Indicates the cooling system is running (on heating/cooling models).