Updating the is a common task for users looking to improve system stability or enable support for 3rd Gen Intel "Ivy Bridge" processors on this older LGA 1155 platform. Since Foxconn shuttered its official motherboard support website in 2019, finding the correct files and procedures requires navigating third-party archives and community forums. Why Update the BIOS?
If you have a corrupt BIOS and the board won't POST:
BIOS updates frequently improve memory controllers, allowing better compatibility with various high-density DDR3 modules and higher clock speeds.
Navigate to the or Security tab and look for a setting labeled BIOS Write Protect or Flash Write Protect . Set this to Disabled . Save your changes and restart the computer. Step 5: Boot into DOS and Run the Flash Command
Foxconn no longer hosts consumer motherboard drivers on their main website. They retired support in 2018. Do not use random "driver updater" tools. Use these safe sources: Foxconn H61mxv V2.0 Bios Update
Extract the downloaded file. It usually consists of the .BIN file and a flashing utility (like AFUDOS.exe ).
Upgrading to an Ivy Bridge CPU (e.g., Core i5-3570) from a Sandy Bridge (e.g., Core i3-2100) often requires a BIOS update to recognize the chip.
What and graphics card are you currently trying to install?
: Confirm your board is exactly the V2.0 model. Flashing firmware for a different revision (like V1.0) will cause permanent damage. Methods for Updating BIOS 1. DOS-Based Update (Most Reliable) Updating the is a common task for users
Have questions or a broken board after the flash? Visit the Win-Raid forums or the Vogons hardware preservation community. Good luck, and keep that LGA1155 legend alive!
Some motherboards come with tools like Foxconn’s own BIOS update utility. If your board supports it:
Navigate to the Exit menu and select (or Load Setup Defaults). This clears old configuration conflicts out of the CMOS memory.
Some newer revisions of Foxconn boards allow you to update directly from the BIOS menu without a USB boot drive, provided the file is on a FAT32 formatted USB stick. If you have a corrupt BIOS and the
Older BIOS versions are picky with high-density 4GB DDR3 modules (double-sided vs. single-sided). A BIOS update improves memory training, allowing 8GB, 16GB, or even 32GB (unofficially) configurations to run stable at 1333MHz or 1600MHz.
Note: Foxconn discontinued its official support websites (foxconnchannel.com) in early 2019. This means finding official files requires alternative sources or legacy archives.
After the update completes successfully, the system should restart. You'll need to re-enter the BIOS Setup (press DEL) to verify the new version number is displayed. It's recommended to "Load Optimized Defaults" (or a similar option) and then save and exit. If you encounter issues:
When you should update