is a reliable, versatile 2MHz Sweep Function Generator widely used in electronics labs, repair shops, and educational settings. Finding the correct documentation is crucial for maximizing its performance. This article provides a direct Protek B801 Go to product viewer dialog for this item.
Similar models in the series, such as the B-810, have documentation available on Scribd .
Your search will be much more efficient if you are certain about the product category. The two primary categories for the "protek b801" are distinctly different. The table below provides a quick reference:
Lithium battery charging carries inherent risks. The B801 integrates several safety protocols to mitigate user error:
The manual breaks down the primary workflows required to configure and run signal evaluations using the front interface. 1. Powering On and Basic Waveform Selection protek b801 manual link
If these steps draw a blank, move on to the more advanced search strategies below.
4-digit integrated frequency counter for live tuning accuracy. 100:1 adjustable control factor on every independent range. Output Amplitude 2V to 20V Peak-to-Peak (P-P) open circuit conditions. Impedance Standard 50Ω ±plus or minus 5% terminal output matching. Waveform Purity Less than 2% sinewave distortion from 10Hz to 100kHz. Step-by-Step Operational Overview
Adjust the final repetition rate by pairing the main Frequency Dial with the appropriate range switch. Troubleshooting Common Operator Errors
The Protek B801 manual link offers several key features that make it a versatile and convenient power supply solution:
Happy measuring. 🔧
You can search for data sheets and manuals on the Protek Instrument Support page .
The fundamental electrical parameters as outlined in the official technical specifications include: Specification Details 0.02Hz to 2.0MHz divided into 7 selected ranges Waveform Outputs Sine, Square, Triangle, Pulse, and Ramp Tuning Control Range 100:1 ratio on any selected range Frequency Accuracy ±5% of Full Scale (FS) Output Impedance Output Amplitude 2V to 20V Peak-to-Peak (P-P) open circuit DC Offset Control Continuously variable from < -10V to > +10V Attenuator Steps 0 to 40dB (20dB fixed step + 0-20dB variable) Sine Wave Distortion < 2% from 10Hz to 100kHz Square Wave Rise/Fall < 100 nanoseconds at maximum output amplitude Front Panel Configurations & Key Features Similar models in the series, such as the
In conclusion, the Protek B801 manual link is a valuable feature that provides users with a convenient and flexible way to select the desired output voltage. With its high accuracy and ease of use, the Protek B801 manual link is an essential tool for various electronic applications. Whether you are a hobbyist, engineer, or researcher, the Protek B801 manual link is a reliable and versatile power supply solution that can meet your specific needs.
The is a 2MHz Sweep Function Generator designed for electronic testing, calibration, and signal generation. Finding a direct, single-page manual link for this specific legacy model can be challenging, as it is often bundled with similar models like the B803 or B810. Direct Manual & Documentation Links While a standalone manual for only the
| Feature | Specification | | :--- | :--- | | | AC 100-240V or DC 11-18V | | Charge Current | 0.1A to 8.0A | | Discharge Current | 0.1A to 2.0A | | Supported Chemistries | LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, Pb | | Max Cell Count | 6S (Lithium) / 8S (NiMH/NiCd) | | Internal Resistance Meter | Yes (Cell IR) |
: This is normal during the first 10 to 15 minutes of operation. Always perform critical filter calibrations after the bench equipment has completed its standard warm-up window.
Standard
GB/T 16270-2009 High strength structural steel plates in the quenched and tempered condition (English Version)
Standard No.
GB/T 16270-2009
Status
valid
Language
English
File Format
PDF
Word Count
3000 words
Price(USD)
60.0
Implemented on
2010-4-1
Delivery
via email in 1 business day
Detail of GB/T 16270-2009
Standard No.
GB/T 16270-2009
English Name
High strength structural steel plates in the quenched and tempered condition
1 Scope
This standard specifies designations, dimension, shape, weight, and allowable deviation, technical requirements, test method, test rules, packaging, marks and quality certificate of high strength structural steel plates in quenched and tempered condition.
This standard is applicable to high strength structural steel plate whose thickness shall not exceed 150mm and delivery state is slack quenching (quench plus tempering).
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this national standard. For dated reference, subsequent amendments (excluding correction) to, or revisions of, any of these publications do not apply. However, the parties who enter into agreement according to these specifications are encouraged to research whether the latest editions of these references are applied or not. For undated references, the latest edition of the normative document is applicable to this standard.
