Ideal for enzyme assays such as ALT (SGPT), AST (SGOT), and ALP.
Check tubing alignment under the pump cover. Clean the aspiration needle with a fine wire. Out of paper or paper loaded backward.
Select an empty technique slot or choose to modify an existing one.
The Ultimate Guide to the BioSystems BTS-350: Operation, Maintenance, and Troubleshooting
is a compact, stylish, and robust semi-automatic analyzer. It is powered by advanced LED technology, which ensures long-lasting performance and reduced power consumption, making it an ideal choice for laboratories seeking reliability without constant maintenance. Innovative LED Powered System: The biosystems bts 350 user manual
Re-calibrate the optical system using the "Utilities" menu, and ensure the filter wheel is clean.
Allow the unit 10–15 minutes to reach the programmed temperature (usually 37°C for most enzymes). 3. Programming and Running Assays
| Gas | Low Alarm | High Alarm | Action | |-----|-----------|------------|--------| | O₂ | 19.5% | 23.0% | Evacuate / ventilate | | H₂S | 10 ppm | 15 ppm | Leave area, SCBA | | CO | 35 ppm | 200 ppm | Ventilate, mask | | LEL | 10% | 20% | Stop ignition sources |
Check for a blockage in the intake needle or a leak in the peristaltic pump tubing. Conclusion Ideal for enzyme assays such as ALT (SGPT),
The BTS-350 supports various analytical measurement types. Users can configure parameters based on the specific BioSystems reagent kit instructions. Analytical Modes Supported
If aspiration is slow, perform a deep clean or run a cleaning solution through the tubing.
Comprehensive Guide to the BioSystems BTS-350 Semi-Automatic Analyzer User Manual The BioSystems BTS-350
: Navigate to the "New Analysis" menu and choose the target analyte (e.g., Glucose, Cholesterol, Creatinine). Out of paper or paper loaded backward
The results will appear on the screen and can be printed or exported. 4. Calibration and Quality Control (QC)
Disclaimer: This article is a summary based on available online documentation for the BioSystems BTS-350 analyzer. Always consult the physical user manual provided by the manufacturer before operating laboratory equipment.
Following the prompt, aspirate the patient sample.
: The analyzer supports several measurement methods, including: Fixed Time Differential Mode Quality Control (QC)
: Monochromatic or bichromatic readings. Used for assays like Glucose or Total Protein.
This guide acts as an overview and companion to the official , providing key operating procedures, maintenance routines, and troubleshooting tips to ensure the best performance from your analyzer. 1. Introduction to the BTS 350 Go to product viewer dialog for this item.