Civil 3d Subassembly Composer Tutorial Pdf |verified|

: Files are saved as .pkt (packet) files, which contain all the geometry and metadata.

The component acts as an IF/THEN statement. For example: Is_Cut = Elevation_Target > P1.Y .

In Properties, set the Point Construction to . Set From Point to P1 . Set Slope to -SideSlope and Delta X to DitchWidth / 2 . Check the box to Check Create Link ( L1 ). Step 4: Create the Ditch Bottom Drag a third Point ( P3 ) under P2 . Set Point Construction to Delta X and Delta Y . Set From Point to P2 . Set Delta X to 0.0 and Delta Y to -DitchDepth . Check Create Link ( L2 ). Step 5: Return to the Surface (Outward Slope) Drag a fourth Point ( P4 ) under P3 . Set Point Construction to Slope and Delta X . Set From Point to P3 . Set Slope to SideSlope and Delta X to DitchWidth / 2 . Check Create Link ( L3 ). Step 6: Create the Material Shape Drag a Shape block to the bottom of the flowchart.

Finding the right can fast-track your learning curve. This comprehensive guide details what you need to know about SAC, how to utilize learning materials effectively, and the foundational steps to get you started. What is Autodesk Subassembly Composer? civil 3d subassembly composer tutorial pdf

: Points define the location of vertices; Links connect points to form edges; and Shapes are closed loops used for material quantity takeoffs.

Before placing geometry, define user-changeable variables in the tab: CurbHeight (Type: Double, Default: 0.150m) CurbWidth (Type: Double, Default: 0.150m) GutterWidth (Type: Double, Default: 0.300m) GutterSlope (Type: Grade, Default: -2.0%) Step 2: Establish the Origin and Gutter

The Subassembly Composer workspace consists of five interactive panels. : Files are saved as

Contains the building blocks (Points, Links, Shapes, and Advanced Logic).

If the fill height > 1.0 m, add a berm. Else, direct daylight.

Select the new point P1 . In Properties, set its Origin to 0, 0 . Assign the code "Top_Curb" . Drag a second P2 under P1 . Set P2 geometry type to Delta X and Delta Y . In Properties, set the Point Construction to

Used for daylighting, allowing links to project at a specified slope until they intersect existing ground surfaces. Decision Elements

: Drag and drop Points, Links, and Shapes into the Flowchart. Apply Logic