Iwata 2crh Bundy Clock Manual Link Info

Use or - to set the current hour. Note: 24-hour format is common during setup. 04 Minute

Always use officially sized Iwata time cards to prevent paper jams and damage to the print head.

To begin setting up your Iwata 2CRH, you must unlock the device and access its control panel. Unboxing and Powering On

Press and hold the button for 3 seconds until the display flashes. iwata 2crh bundy clock manual

: Turn off the power, clear any jammed cards, and turn the power back on.

Move the switch to . The year digits will begin flashing.

: Returns to the previous setting without saving changes. Use or - to set the current hour

Set the time you want the printer to switch back to black (e.g., 17:00 for standard clock-out). Setting the Internal Melody or External Bell

Set the time the machine considers a "new day" (usually 00:00). Color Change Set specific times for the ribbon to switch between 3. Key Button Functions : Increase or decrease the selected value. : Confirms the current setting and moves to the next code. : Returns to the previous setting code.

While the internal battery protects your data settings, a prolonged outage without power will cause the display to go blank. The internal data will remain saved, but you may need to reset the exact time once power is restored. 6. Helpful Tips for Maintenance To maximize the lifespan of your Iwata 2CRH To begin setting up your Iwata 2CRH, you

Adjust the last two digits of the year (e.g., "26" for 2026). Set current month (01–12). Set current day of the month. Set hour (ensure AM/PM is correct if in 12h mode). Set current minutes. Signal Duration Set how long the melody/bell rings (in seconds). Day Change

Small flathead screwdriver (2mm) or included adjustment key.

The machine will automatically print in red if the employee punches in late or leaves early. B. Replacing the Ribbon Open the top cover. Locate the ink ribbon cassette.

Shift the device into mode; the print head will usually slide to the center.