Programming Manual Exclusive | Siemens Hipath 3800

Distributes calls evenly across all members sequentially. Collective: Rings all group members simultaneously.

The true value of the exclusive manual lies in its documentation of advanced features:

The manual details the setup for "exclusive" high-tier features that distinguish the 3800 from smaller HiPath models.

Select your specific region to automatically load local tone plans, impedance values, and signaling parameters. siemens hipath 3800 programming manual exclusive

Before initiating any programming session, you must understand the hardware limits and establish a secure connection to the central control unit. Hardware Architecture

Every physical port on an SLMO or SLMA board must be assigned an internal extension directory number (DN). Navigate to > Setup Stations .

While there is no single "exclusive" manual for the HiPath 3800 Distributes calls evenly across all members sequentially

For direct Expert Mode CLI administration.

For basic setup, common programming areas in include:

Connecting the HiPath 3800 to external networks requires configuring trunks (ISDN PRI/BRI, Analog lines, or SIP Trunks). LCR (Least Cost Routing) Setup Select your specific region to automatically load local

Input the desired internal dialing number (e.g., 201 , 3005 ).

Pattern 0 : Configured for localized mobile or national tracking codes. Configuring LCR Tables Open -> LCR -> Dialing Paths . Map dialed prefixes to specific trunk groups.

To program abbreviated dialing codes accessible by all users:

Cyclic (Round Robin): Distributes calls evenly among group members.

Define multiple COS levels (e.g., COS 1: Full International , COS 2: National Only , COS 3: Internal Only ).