Qidi X-pro Manual - [hot]

Wait for the printer to home its X, Y, and Z axes. The nozzles will move to the first leveling point.

Remove the foam packaging. Do not throw away the foam blocks—you will need them if you ever ship the printer for service. Manually rotate the Z-axis lead screws. They should turn smoothly. If you feel grinding, there is shipping debris in the nut.

Verify that both the left and right nozzles sit at the exact same height relative to the bed. If one nozzle drags while the other is loose, use the small set screws on the extruder assembly to calibrate their physical offsets. 4. Filament Loading and Unloading

Print not sticking to bed.

Slide a standard piece of A4 paper between the left nozzle and the heated bed.

If you experience consistent under-extrusion or over-extrusion, calibrating the extruder's E-steps (the number of motor steps required to extrude 1mm of filament) may be required.

*Note: The QIDI X-Pro is a bed-slinger (moves front to back qidi x-pro manual

By following these guidelines, you can harness the full potential of the QIDI X-Pro. Whether you are printing complex mechanical parts with soluble supports or creative multi-colored art, this machine is a workhorse that rewards careful setup and regular maintenance.

Regular maintenance is crucial for the longevity and performance of the Qidi X-Pro. The manual provides detailed guidance on:

QIDI is known for responsive customer service. The manual includes direct email contacts: Wait for the printer to home its X, Y, and Z axes

Tap to move to the third point, adjust the nut, and repeat the process one final time to verify consistency across all points. 4. Filament Loading and Unloading Loading Filament

Re-level the bed using the paper test. Clean the flexible build plate with IPA or apply a thin layer of glue stick.

Solution: