Do you require a breakdown of the tied to these material specifications? Share public link
Directly linking to or reproducing the full copyrighted document is not possible. However, below is where to find it officially and a summary of typical key contents of ADSCC Part 2.
Water conservation fixtures, greywater recycling infrastructure, and insulation of hot/cold water pipes to prevent thermal gains. 3. Material Approval and Quality Control (QC) Protocols
The ensures that the technical execution of projects meets international quality benchmarks while being specifically designed for the region's harsh conditions. From road utilities and street lighting to the precise compaction of fill materials, these regulations are key to building reliable infrastructure. standard construction specifications part 2 abu dhabi
Requirements for Microsilica (Silica Fume), Ground Granulated Blast-furnace Slag (GGBS), and Fly Ash blends to lower permeability. It dictates maximum water-to-cement ratios (typically ≤0.36is less than or equal to 0.36 for substructures) and concrete curing temperatures.
Expansion, isolation, and construction joints must be detailed using approved elastomeric sealants. This accommodates the severe thermal movements caused by daily temperature fluctuations. Storage and Handling
While the term "Part 2" can vary by agency (e.g., ADDC for electricity or ADSSC for sewerage), it generally follows the standard CSI three-part format where specifically covers Products and Materials . Key Components of Part 2 Do you require a breakdown of the tied
: Technical specifications for masonry, plastering, painting, and waterproofing.
Minimizes financial risks associated with material rejection, project delays, and legal disputes by establishing clear, standardized benchmarks from day one.
Part 2 must always be read in conjunction with the Abu Dhabi Standard Drawings. While the text in Part 2 describes how a material should perform, the drawings show the exact physical dimensions and layouts required for installation. Best Practices for Contractors and Consultants From road utilities and street lighting to the
These specifications must be included as part of the contract documents for all roads and road structures construction projects in the Abu Dhabi Emirate.
Contractors are incentivized to source raw materials within a specific radius of the construction site to lower the carbon footprint associated with transport logistics. Water Conservation
Standard Construction Specifications (SCS) Part 2 typically refers to the detailed technical requirements for Road Utilities
The specification actively promotes and regulates the use of recycled concrete aggregates (RCA) obtained from crushed construction demolition waste. RCA is permitted for use in non-structural applications, such as road sub-base layers and pipe bedding. Local Sourcing and Carbon Reduction