Equatech Universal Tv Wall Mount 32 To 100 Instructions Portable Hot! Guide

Designed to fit various hole patterns on the back of your TV. Equatech Universal TV Wall Mount Go to product viewer dialog for this item. Installation Instructions

Secure the wall plate using the heavy-duty lag bolts provided in the kit. 4. Attach Brackets to the TV Lay your TV face down on a blanket or flat surface.

Once hooked, engage the safety locking mechanism or tighten the security screws at the bottom of the brackets to prevent the TV from being knocked off. How to Make the Equatech Mount Go to product viewer dialog for this item. "Portable"

Ensure the arms are centered and oriented correctly (usually with the security screw hole facing downward). Tighten securely but do not over-tighten, as this can damage your TV. Step 2: Install the Wall Plate Designed to fit various hole patterns on the back of your TV

: Use your stud finder to locate two adjacent wood studs. Mark the center of each stud. Hold the wall plate at your desired height, use the bubble level to ensure it is straight, and mark the pilot hole locations directly over the stud centers. Drill your pilot holes 2.5 inches deep using a 3/16" drill bit.

When installing, use high-quality, long-head screws that are easy to unscrew later. Cable Management:

The Equatech Universal Wall Mount is a heavy-duty, low-profile bracket designed to hold virtually any plasma, LCD, or LED TV ranging from 32 inches all the way up to a massive 100 inches. It’s an incredibly versatile piece of kit, capable of handling up to . How to Make the Equatech Mount Go to

Setting Up Your Viewing Sanctuary: The Equatech Universal TV Wall Mount (32"–100")

Position the wall plate over the anchors and drive the lag bolts into place until tight. Step 4: Hang the TV onto the Wall Plate

Use a masonry drill bit (typically 3/8-inch or 10mm) to drill holes into the concrete. If it attaches to a wall

If you're interested, I can so you can compare prices and features .

: Equatech does not manufacture a single “wall mount” that is also portable. If yours has wheels, it is a floor stand . If it attaches to a wall, it is not portable unless it features a detachable plate.