917-front Audio Not Connected __full__ Jun 2026

: The internal high-definition (HD) audio wiring linking the front I/O panel to the motherboard has come loose or shaken disconnected.

If you are using the original HP case, a loose internal cable is the most likely culprit.

Once you have your front audio working again, keep it that way.

Error Code 917 is a diagnostic message generated by your computer's during the Power-On Self-Test (POST). The POST is a built-in diagnostic process your computer runs through every time you turn it on to make sure all essential hardware is present and working before loading the operating system. 917-front audio not connected

The "917-Front Audio Not Connected" error is rarely a sign of critical hardware failure. It is simply a strict safety and diagnostic check by HP's proprietary firmware. By securing the internal cable, using an adapter during a case swap, or resetting your CMOS, you can eliminate the annoying boot prompt and get your desktop running smoothly again.

If the BIOS setting isn't available, you'll need to inspect the physical connection. Always power down your computer and unplug the power cord before you begin.

If the hardware is connected but the error persists, check your software environment: BIOS Settings: : The internal high-definition (HD) audio wiring linking

for bridging those motherboard pins, or are you looking for a replacement front I/O board

Look for bent pins on the motherboard header.

Turn on the computer and immediately tap the repeatedly to enter the BIOS Setup Utility. Navigate to the Advanced or Boot Options tab. Error Code 917 is a diagnostic message generated

On some HP models, you can disable the hardware alerts entirely so the computer boots directly to Windows without forcing an F1 key press.

your computer entirely and unplug it from the wall. Open the side panel of the computer case.

917 - Port audio avant non connecté - Page 2 - HP Support Community

If you are seeing a message indicating that or simply that your front panel audio is not connected , you are likely dealing with a broken, loose, or incorrectly configured audio cable in your computer. This error commonly appears in Windows Device Manager or during boot-up, leading to a frustrating lack of sound from your headphone or microphone jacks.