Download the correct version of the Alcor Micro AU6989SN MPTool. Extract the compressed folder ( .zip or .rar ) to a dedicated directory on your local storage drive (e.g., C:\Alcor_MPTool\ ). Do not run the tool directly from inside a compressed file.
: Create a specialized read-only partition that acts as a virtual CD-ROM, often used for bootable software or installers. Security & Encryption
It allows you to change the Vendor ID (VID) and Product ID (PID) 1.2.2.
Before touching the software, you must understand the hardware. The AU6989SN is a single-chip USB 2.0 NAND flash controller. It is designed for: Alcor Micro Au6989sn Mptool
Always connect the flash drive to a (rear ports on desktops). Avoid USB 3.0 ports or external USB hubs, as they disrupt low-level data streams. Step-by-Step Execution Guide 1. Launch the Program
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Choose Low-Level Format (or Full Scan) if your drive is heavily corrupted or showing 0 bytes. Select High-Level Format if you are only attempting to remove a light write-protection bug. Download the correct version of the Alcor Micro
Click the Start (A) button to begin the repair process.
If your drive has high degradation, set the ECC to a higher number (like 12 or 15) to help the controller work around unstable memory sectors.
Using this tool involves low-level firmware changes. If the wrong version is used or a process is interrupted, it can permanently "brick" the USB drive. It is highly recommended to verify your specific Flash ID (FID) and controller model before attempting any repairs. step-by-step guide : Create a specialized read-only partition that acts
Re-insert the drive into a different USB 2.0 port, or run LoadDriver.exe manually to force installation of the Alcor bus drivers.
: Re-flash the instruction set if the drive isn't identifying itself correctly.
. It re-initializes the NAND chip, meaning all existing data on the drive will be permanently erased. Version Matching
Choose High-Level Format if the drive is mildly corrupted. Choose Low-Level Format (Natural Check or Half-Capacity Check) if the drive has severe bad sectors.
In "Device Type," you can pick from many modes: