Prosecure Opti Combi Manual English |top| Link

Optocoupler (active high or active low depending on settings) Temperature Range: -20°C to +55°C (-4°F to 131°F) IP Rating: IP54 (weather-resistant) 2. Mounting and Installation

Based on technical documentation from dormakaba , the setup involves several critical steps:

Use the sensitivity dial (often labeled SENS) to expand or shrink the detection area. Turn clockwise to increase sensitivity. Infrared Field Adjustment (Safety Presence)

The ProSecure Opti Combi includes a multi-conductor cable. Ensure all power is disconnected from the automatic door controller before wiring. Wire Color Connection Function Controller Terminal Power Input (+) 12–24 V AC / 12–30 V DC Black Power Input (-) 12–24 V AC / 12–30 V DC White Motion Relay (COM) Activation / Inside Trigger Yellow Motion Relay (NO) Activation / Inside Trigger Green Safety Relay (COM) Safety / Presence Input Gray Safety Relay (NC/NO)* Safety / Presence Input

Check if the output logic (C2-3) matches your door controller's requirements (Active High vs. Active Low). False Triggers: prosecure opti combi manual english

Red (Motion), Green (Presence), Amber (Error/Setup). 6. Safety Notes Ensure the power is off during installation.

Use the mechanical adjustment screw or click-wheel located next to the optical lens to tilt the safety curtain.

By following the guidelines and instructions outlined in this article, you'll be able to enjoy a reliable, efficient, and cost-effective heating solution with your ProSecure Opti Combi. Happy reading!

The Prosecure Opti Combi is a sophisticated piece of safety technology, central to the modern automatic door system. Its dual-technology approach ensures the convenient automatic opening of doors, balanced with the high-level safety protection required by international standards. Optocoupler (active high or active low depending on

Use the mechanical click-wheel adjustment to move the safety curtain closer to or further away from the door blades.

Test the activation (radar) and safety (AIR) functions multiple times before finalizing installation. 4. Troubleshooting and Maintenance

ProSecure Opti Combi offers several modes:

I can provide the exact button-press sequence or terminal wiring layout for your specific door controller. Share public link Active Low)

Remove the outer plastic cover of the ProSecure Opti Combi by pressing the release tabs (usually located at the bottom or sides).

The ProSecure Opti Combi is an EN 16005-compliant sensor for automatic sliding doors that combines microwave radar for motion detection and active infrared (AIR) for safety. The device requires specific mounting and wiring configurations for optimal functionality, featuring adjustments for inclination angle and presence zone coverage. For the official English manual, download the Opti Combi Quick Guide from dormakaba . prosecure opti combi

Dorma ProSecure Opti Combi is a dual-technology sensor designed for automatic sliding doors, combining microwave motion detection with active infrared (AIR) safety zones.

Keep the sensor lens clean and free of obstructions to ensure longevity and precise performance. Door will not close, LED is continuously Orange