The you are using (Magnetic Lock or Electric Strike)?
If you lose the master code:
Fix the back cover firmly to the wall using the provided wall plugs and screws. Thread the cable through the cable hole. Attach the keypad to the back cover and secure it. Terminal Wiring Identification Wire Color Label / Function Description Positive 12V DC Power Input Black Negative Ground Power Input Green Wiegand Output/Input Data 0 White Wiegand Output/Input Data 1 Yellow Exit Button Connection (Triggers Ground) Blue Relay Normally Open Contact Purple Relay Common Contact Orange Relay Normally Closed Contact Grey Alarm Output Negative (-) Brown Doorbell Button Connection Wiring for Common Lock Types Fail-Safe Lock (e.g., Magnetic Lock / Dropbolt)
For security purposes, change the default master code immediately during installation. Enter Programming Mode ( * 9999 # ). Press 0 . Enter the + # . Re-enter the New Master Code + # . Exit Programming Mode ( * ). Adding User Cards
If you forget the system password or need to restore factory settings, follow these steps: V2000-c Rfid Access Control User Manual
The system is now reset to factory defaults. The Master Code reverts to , and all system settings return to standard configuration. Note: User data (cards and PINs) will not be deleted during this hardware reset. Troubleshooting
This guide provides a comprehensive overview of the , designed to assist with installation, programming, and troubleshooting of this popular security device . The V2000-c is a stand-alone RFID proximity access control unit, widely used for enhancing security in office buildings, apartments, and residential properties. V2000-C RFID Access Control Overview
To configure the unit, you must enter programming mode: * → [Master Code] → # (The yellow LED will light up, indicating you are in programming mode) . 4.2 Changing the Master Code Enter Programming Mode: * 123456 # Press 0 → [New 6-digit Master Code] → # Repeat [New 6-digit Master Code] → # Exit: * 4.3 Adding Users (Cards or PINs) Enter Programming Mode. Press 1 → [Read Cards] → # → * Add PIN Only: Enter Programming Mode. Press 1 → [Enter 4-6 digit PIN] → # → * 4.4 Deleting Users Delete a Card: Enter Programming Mode. Press 2 → [Read Card] → # → * Delete by PIN: Enter Programming Mode. Press 2 → [Enter PIN] → # → * 4.5 Setting Door Relay Time To adjust how long the door stays unlocked: Enter Programming Mode. Press 4 → [0-99 seconds] → # → * 5. Troubleshooting & Tips
In programming mode, press 1 + Slot ID (e.g., 001 to 999) + # + Swipe Card + # . The you are using (Magnetic Lock or Electric Strike)
To perform any administrative tasks, you must first enter .
: Initialization only resets the system password to the factory default 12345 . All other user data (cards, PIN codes) remains intact.
procedures if the master code has been changed. Adding large batches of cards. Let me know what you need to fix or configure! Share public link
The V2000-C RFID Access Control system provides a robust, standalone security solution for managing entry points using 125kHz EM cards or 4-digit PINs, accommodating up to 1,000 users. It features versatile, non-PC-based management for adding/deleting users and flexible wiring options for both fail-safe and fail-secure modes, suitable for small to medium-sized facilities. Attach the keypad to the back cover and secure it
In programming mode, press 4 + Time in seconds (0-99) + # . (Factory default is 5 seconds). Resetting to Factory Defaults
In programming mode, press 0 + New 4-8 Digit Code + # + Repeat New Code + # . User Management
Backlit keypad for visibility in low-light conditions.