Canon Service Tool V5610 Page

: The green power light will flash a few times and then stay solidly lit. Your computer may play a sound indicating a new USB device ( Canon Device or Service Mode ) has been detected. How to Reset the Waste Ink Counter Using v5610

Clears the 5B00, 5B01, or 1700 waste ink errors.

The Service Tool v5610 will detect your printer under normal operating conditions. You must manually boot the printer into Service Mode first. Step-by-Step Service Mode Guide

The (often labeled as ST_v5610.exe ) is a proprietary, unofficial software application designed to interface with the service mode of many Canon PIXMA and MAXIFY printers. It is not released by Canon for general public use; it is intended for authorized service centers. However, it has become widely available through third-party sources.

Before you decide to download and run the Canon Service Tool V5610, you must be aware of the significant risks involved. canon service tool v5610

Before you begin, it is vital to understand the risks:

If your printer has done high-volume printing, you may eventually need to manually clean or replace the absorber pads, or the ink may leak from the bottom of the printer.

Once your printer is in Service Mode, connect it via a (Wi-Fi will not work) and open the software.

Using service tools carries a risk if not done correctly. Ensure you have the following before proceeding: : The green power light will flash a

: If you attempt to use the tool without being in Service Mode, or if the printer is already "hard locked" from too many failed reset attempts, the tool may display an "Error 006" or "Error 002." Important Maintenance Note

Because this is an unauthorized service utility distributed outside official retail channels, Windows Defender or third-party antivirus suites often flag it as a false positive.

The specific function you clicked is not supported by your model.

Here is informative content regarding the , a software utility used primarily for Canon inkjet printers. The Service Tool v5610 will detect your printer

Once your printer is successfully sitting in Service Mode, follow these steps to execute the reset: Step 1: Establish a USB Connection

: Perform deep cleaning cycles that are more intensive than standard maintenance. Model Settings

A prompt saying "A function was finished" should pop up. Click OK.

G1000, G1010, G2000, G2010, G3000, G3010, G4000, G4010, and newer G-series variants . E-Series: E200, E300, E400, E470, E480, and E3100 . IB & MB Series: Various Maxify models .