Sharp Atomic Clock Spc373 User Manual !free! [WORKING]

: Automatically synchronizes with the NIST radio signal from Fort Collins, CO, maintaining precision within one second. Comprehensive Display

If you live outside the signal range or need to override the atomic time, you can configure the clock manually. Step 1: Enter Setting Mode

The display is faint, or the backlight causes the screen to blank out. Low battery power.

: Ensure the DST function is set to ON if you want the clock to adjust automatically twice a year. If you live in an area like Arizona that doesn't observe DST, you can toggle this to OFF . sharp atomic clock spc373 user manual

The SPC373 has two independent alarms. This is useful for partners with different wake times or a weekday/weekend split.

When the alarm sounds, press the large button on top of the clock. The alarm will stop and sound again after 5 minutes.

Appears when the daily alarm is activated. DST Indicator: Appears when Daylight Saving Time is active. Control Buttons and Layout : Automatically synchronizes with the NIST radio signal

Once the batteries are in, the clock will automatically begin searching for the Atomic Signal (RCC). You will see the "Tower" icon flashing.

For additional assistance, you can contact the manufacturer, , at 1-800-221-0131 . Sharp atomic clock spc373

The Sharp SPC373 offers a high-visibility LCD screen that packs several key data points into one interface. Understanding the display icons will help you navigate your clock easily. Key Features Low battery power

: Press and hold the UP button (or "Wave" button if labeled) for 3 seconds to manually trigger a signal search. Outdoor Temp Not Displaying : Ensure the sensor and clock are on the same channel.

Place the sensor within (approx. 100 feet) of the clock.

Use the (▲) and DOWN (▼) buttons to set the desired hour. Pay close attention to the PM indicator on the screen. Press the ALARM button again to make the minutes flash. Use the UP (▲) and DOWN (▼) buttons to set the minutes. Press ALARM one final time to save the settings. Turning the Alarms On and Off

The Sharp SPC373 is a desktop or wall-mountable atomic clock designed for home or office use. Its key features include: