Open a terminal emulation program (like PuTTY) on your PC, set the baud rate to 115200, and power on the TV.
: Provides USB firmware specifically for the Novex NWX-32H171MSY. Google Drive Mirror
The TP.SK506S.PB802 board is universal, but the firmware is specific to the LCD panel (e.g., 1366x768 or 1920x1080 resolution). Look for a sticker on the back of the LCD panel inside the TV casing.
Turn off the television and unplug the power cord from the wall outlet.
Open the TV casing and locate the white sticker on the back of the LCD panel matrix. Note down the panel model number (e.g., V320BJ7-PE1, ST3151A05, etc.). You must match this panel number when downloading the TPSK506SPB802 firmware file. 2. Format the USB Drive tpsk506spb802 firmware usb link
| Parameter | Must match exactly | |-----------|---------------------| | Mainboard | TP.SK506S.PB802 | | Resolution | 1366 × 768 or 1920 × 1080 (as per your panel) | | eMMC size | 4 GB or 8 GB | | Wi‑Fi module | Realtek 8188, 8723, etc. |
Use a programming clip (or desolder the chip) to connect the programmer directly to the chip pins.
The physical USB port traces directly back to the main SoC (System on Chip) data pins (D+ and D-).
Are you trying to fix a specific issue like a or a boot loop ? Open a terminal emulation program (like PuTTY) on
This board integrates all essential TV functions onto a single PCB. Depending on the specific factory configuration, the TP.SK506S.PB802 comes with different memory combinations (1 GB of RAM coupled with either 4 GB or 8 GB of eMMC storage), various panel timing tables (HD‑ready 1366 × 768, Full HD 1920 × 1080, and multiple 4‑lane or 8‑lane V‑by‑One maps), and tuner variants (DVB‑T/T2, ATSC, or ISDB‑T). Wi‑Fi modules also vary, commonly using Realtek 8188 or 8723 chips.
– Tool confirms checksum; module reboots into new firmware.
The TP.SK506S.PB802 mainboard features a built-in hardware boot-loader mechanism. This routine scans the physical USB ports for a valid update file before initializing the standard Android operating system. Step 1: Power Down and Connect
Watch the standby LED indicator light. It will begin flashing rapidly, indicating the USB link is active and files are transferring. Look for a sticker on the back of
: For the USB link to work, the firmware file must usually be named precisely (e.g., allupgrade506_8GB_1GB_sos.bin ) and placed in the root directory of a FAT32 formatted USB drive.
Plug your prepared flash drive into the primary USB port on the board.
: Connect an external keyboard to the USB port. Press Menu , enter the blind factory sequence code 1147 or 2580 , and use the arrow keys to navigate to the "Panel Settings" section to adjust the map configurations. If the screen remains entirely unresponsive, you must source an alternate allupgrade506 binary compiled specifically for your display panel model. The TV Reboots Continuously Every Few Minutes