Galaxy Aqua Premier Installation Manual [cracked] Jun 2026

Flush the cold water pipe thoroughly before connecting it to the shower. This removes debris, solder fragments, or flux that could damage the internal control valves.

Galaxy Aqua Premier is an instantaneous electric water heater (typically 9.5kW) designed for direct mains supply. Installation must be performed by a suitably qualified person and comply with (IEE wiring regulations). The Shower Doctor Core Installation Requirements Water Supply : Must be connected to the mains cold water supply Minimum Running Pressure

To maintain water quality and extend the lifespan of your Galaxy Aqua Premier, replace the filters according to this recommended timeline: Filter Type Expected Lifespan 3 - 6 Months Removes dust, rust, and mud Sediment Filter 6 - 12 Months Traps fine suspended particles Pre-Carbon Filter 6 - 12 Months Removes chlorine, organic chemicals, and bad odours RO / UF Membrane 12 - 24 Months Removes dissolved solids, heavy metals, and pathogens Post-Carbon Filter Enhances the final taste of the water Troubleshooting Common Issues Water is leaking from connections

Every 6 months. Removes chlorine, bad taste, and volatile organic odors.

: All plumbing must be completed and water supplies turned on galaxy aqua premier installation manual

Every 24 months. Rejects microscopic impurities, heavy metals, and dissolved solids.

Feed the water pipe and electrical cable through the respective entry ports on the backplate.

Turn on a cold water faucet downstream and let it run for 10 to 15 minutes. This flushes out manufacturing residue and loose carbon fines from the new cartridge. The water may look cloudy or dark initially; this is normal and will clear up. Troubleshooting Common Issues Water Leaks from the Housing Threads The O-ring is dry, dirty, misaligned, or damaged.

Attach the flexible supply hose from your cold water supply line to the "INLET" port of the Galaxy Aqua Premier. Connect the second flexible hose from the "OUTLET" port to your downstream plumbing or dispensing faucet. Tighten the connections firmly with an adjustable wrench, but avoid over-tightening, which can crack the fittings. Step 6: Install Cartridges or Components Flush the cold water pipe thoroughly before connecting

Press the Start/Stop button. Allow water to flow through the unit for at least two minutes. This primes the internal tank and purges all trapped air. Step 9: Final Assembly and Testing

Fit the front cover onto the backplate and secure it with the screws.

The Galaxy Aqua Premier typically features clear INLET and OUTLET ports.

Check all tubing joints, housings, and valve connections immediately for leaks. Installation must be performed by a suitably qualified

Close the downstream faucet and inspect every connection point thoroughly for slow drips. 5. Maintenance and Filter Replacement

Align the filter head with the cut pipe, ensuring the "IN" port faces the incoming water supply and the "OUT" port points toward the house.

Thread the provided feed water adapter valve onto the shut-off valve using Teflon tape.

This guide provides a detailed walkthrough for installing your Galaxy Aqua Premier electric shower. 1. Pre-Installation Essentials