Locate the jumper near the battery. Move the plastic cap from pins 1-2 to pins 2-3 for 10 seconds, then return it to pins 1-2. Reinsert the battery and plug the PC back in. No POST / Beep Codes
Disclaimer: This information is based on public records for the Acer 915M08-G-8KS. Upgrades and repairs should be done with care given the age of the components.
Max FSB 800 MHz; 1066 MHz CPUs will not boot.
: The single 40-pin IDE connector allows you to attach older legacy optical media CD/DVD drives or vintage IDE hard drives. Remember to set the plastic jumper on the back of the IDE device to "Master" or "Slave" according to your cable routing configuration. Rear I/O Panel Layout acer socket lga775 pcie motherboard 915m08g8ks manual
4 x USB 2.0, VGA, Ethernet (RJ-45), Serial, Parallel, and 6-channel audio jacks. Front Panel Header Pinout
Before upgrading parts on this motherboard, verify your components match these precise limitations. Supported CPUs
DDR2 SDRAM (Dual-Channel configurations supported). Locate the jumper near the battery
The PCIe x16 slot allows for a modern GPU, but the CPU and memory will severely bottleneck any high-end card. Download Acer Support Drivers and Manuals
Access the BIOS by pressing the or F2 key immediately after powering on the system.
Locate the 3-pin jumper labeled near the CR2032 coin-cell battery. No POST / Beep Codes Disclaimer: This information
: A collection of legacy connections that feel like ancient ruins today—a Parallel port for old printers, a Serial port for industrial equipment, and even headers for a Floppy Disk Drive .
The is a legacy OEM motherboard found in mid-2000s desktop computers, such as the Acer Aspire E300 and Acer Power series. It features the Intel 915G chipset and the Socket LGA775 processor interface.
Understanding the physical boundaries and hardware compatibility of the 915M08-G-8KS
Connect the positive wire (colored) to Pin 2 and the negative wire (white/black) to Pin 4 .