Amada Pega 357 User Manual !full! Page

The Amada Pega 357 manual outlines how to interface with the Fanuc/Amadan controller to load programs, set origins, and manage tool layouts. Manual Data Input (MDI) & Editing

Whether you are a new operator, a shop owner who just acquired a used machine, or a maintenance technician tasked with keeping it running, having a clear understanding of the is critical.

with your machine model and serial number to request a "User and Maintenance Manual". CNC Manual Archive: Digital copies of specific guides like the 04PC Operator Manual Pega 357 Programming Limits are hosted on CNC Manual Specialized Support: Lapis Services AMADA Mexico

When the machine halts, the Fanuc screen will display specific alarm numbers. Below are some of the most frequent faults experienced on the Amada Pega 357:

For executing programs automatically from memory or external tape readers.

rely on a scanned PDF that is missing fold-out schematics. The hydraulic and electrical diagrams are often double-page spreads. If your scan cuts off the right edge, you cannot trace circuits.

Standardly equipped with the Amada Fanuc 04PC CNC control .

Disclaimer: Always cross-reference any digital text with your machine’s specific serial number plates, as Amada introduced minor electrical and mechanical changes across different manufacturing years of the Pega 357 series.

The turret cannot rotate because the pin that locks it into place (the index pin) failed to retract, or a tool striker is stuck down.

What is installed on your machine? (e.g., Fanuc 0P-C , Amadan 04P-C )

: Allows two tool stations to rotate 360° in 0.01° increments via NC commands, reducing the number of specialized tools required for complex shapes.

"No," Elias said, tapping the diagram. "Look at the schematic. The manual says there’s a bypass catch. It’s a safety feature. We have to disengage it manually before the system will even recognize the pressure."

Never bypass the safety mats, light curtains, or interlock switches on the turret access doors.

The gap between the punch and die is too wide for the chosen sheet gauge. Symptom: Axis Positioning Error (Overtravel)