Fix Firmware Ml2165 Ml2168 Chip Reset Printer Samsung 676 Link Jun 2026

FIX_NU_Serial_ML2165_V1.01.0X.XX.hd (The custom firmware file mapped to your CRUM/Serial) Step 3: Preparing the Printer for Flashing

A: Yes. Once the FIX is installed, your printer will look for the chip. If it detects a chip, it might read its data and become locked again. To prevent this, you must always remove or tape over the chip on any cartridge you use in that printer.

Check if the tape is completely covering the contacts. If the light remains red without a chip, check your configuration report again to verify if the firmware update actually registered. The Printer is Unresponsive ("Bricked")

Flashing utilities work most reliably on Windows 7, 10, or 11.

Samsung ML-2165 and ML-2168 laser printers are highly reliable machines, but they come with a built-in limitation: page-counter toner chips. When the printer decides the toner is empty based on page count—even if there is plenty of powder left—it locks you out. FIX_NU_Serial_ML2165_V1

If you cannot find the firmware file or the downgrade fails repeatedly, the “676 link” may refer to a hardware bridging trick. Advanced users can:

Press and hold the button for about 15 seconds until the LED stays solid green, then release. Step 2: Download the Firmware Fix

Before starting, gather:

Follow these exact steps carefully to apply the firmware fix to your Samsung ML-2165 or ML-2168 printer. To prevent this, you must always remove or

A: This is a common result of a corrupted or incorrect firmware update. Don't panic. You may need to force a recovery. Disconnect the printer, then reconnect and try the flashing procedure again with the correct FIX file. Some users have reported success by holding the power button while plugging in the printer to enter a recovery mode.

Is your printer a standard or the wireless ML-2165W version?

Drag and drop the .hd firmware file onto the usbprns2.exe application (often provided with the fix).

Cover these contacts completely using a small piece of . Alternatively, you can slide the chip entirely out of its plastic retaining slot. press and hold the Power button.

The unique 11-digit serial number of the chip currently in your toner cartridge. How to Print the Required Reports

Firmware uploading tools ( usbprns2.exe ) run most reliably on Windows environments.

If your printer firmware is locked or highly updated, you must force it to accept the new code: Turn the printer off using the power button. Press and hold the button. While holding WPS, press and hold the Power button.