Ch-899 Chouchin Radio Controlled Clock Instructions -

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

A: Yes. Remove batteries, wait 30 seconds, reinsert, and press the MANUAL button before the first auto-sync attempt. This puts the clock in free-run mode.

If a radio signal is unavailable or you prefer a manual override:

After 10 seconds of inactivity, the clock will save the manual time and begin ticking normally. ch-899 chouchin radio controlled clock instructions

The numbers on the face changed. The minutes shifted. The seconds realigned. The manual override Elias had imposed was wiped away, overwritten by the heavy hand of the Atomic Standard.

Wipe the outer casing with a soft, dry microfiber cloth. Do not use liquid cleaners or water on the back movement.

Press the button repeatedly in short taps to move the hands minute-by-minute for precise alignment. This public link is valid for 7 days

The clock will eventually revert to auto-mode and attempt to synchronize with the radio signal at its pre-programmed time intervals (usually 14 times per day). 3. Forced Signal Reception (REC Button)

: To restart completely, remove the battery, wait at least 1 minute (or short-circuit the reset pins if available), and reinsert it.

Once you reach the correct time, release the button. If you don't press anything for about 7 seconds, the clock will lock in the time and start running normally. 3. Using the REC (Force Sync) Button Can’t copy the link right now

: The clock will exit manual mode automatically if the button is not pressed for 7–8 seconds. Forced Signal Search To manually trigger a fresh search for the atomic signal: Press and hold the REC button for at least 3 seconds.

Follow these step-by-step instructions to set up your CH-899 clock for the first time or after a battery change. Step 1: Insert the Battery

If the clock cannot receive a signal in your location, you can set the time manually to use it as a standard quartz clock:

If you need help with , adjusting for a particular time zone , or need the exact layout diagram for your specific model variant, let me know. Share public link