If your Epson Stylus SX125 printer has suddenly stopped working, displaying flashing red lights, and showing a "Service Required" message on your computer, you have likely encountered the limit. This is a common, built-in mechanism designed to protect the printer from leaking ink.
Epson printers use a built-in firmware counter that estimates how much ink accumulates in the maintenance pads during printhead cleaning cycles.
If the program crashes upon launch, ensure you are running it as an Administrator. You can also right-click AdjProg.exe , go to Properties > Compatibility , and set it to run in compatibility mode for Windows 7.
The program . The ink pads inside are real sponges that fill up. If you reset the counter without cleaning/replacing pads, ink will leak inside the printer. epson adjustment program sx 125 work
Click the button. The program will communicate with the EEPROM to display the current raw point accumulation value and percentage. Verify the saturation percentage shows at or near 100%. Re-check the Main Pad Counter selection box.
Delete all pending print jobs in your Windows spooler.
; using a version for a different model (like the L-series) may cause communication errors. If your Epson Stylus SX125 printer has suddenly
The USB interface is blocked or another driver has grabbed exclusive control.
The SX 125 is part of Epson’s older “SX” multi-function series. Many generic adjustment programs claim to support it, but you need the for the SX 125 (sometimes listed as SX125 or SX 125). Look for a file named something like:
: Check the box next to Main pad counter and click the Check button. The software will read your printer's firmware and show you the exact percentage and point value of your waste pad. If it reads 100%, your lockdown is confirmed. If the program crashes upon launch, ensure you
Ensure the boxes remain checked, and click the button.
Download and extract the utility zip archive to a dedicated folder on your desktop.