Cap 2000 Viscometer Manual Link -

Before plugging anything in, you must prepare a safe workspace.

Routinely verify the instrument using certified Brookfield Viscosity Standards .

| Issue | Solution | | --- | --- | | Instrument not turning on | Check power cord and ensure proper connection | | Measuring head not aligned | Check cone-and-plate alignment and adjust as needed | | Incorrect viscosity readings | Check instrument calibration and ensure proper sample preparation |

: Operates between 5 and 1000 RPM, allowing for precise shear rate control. cap 2000 viscometer manual link

: Standard ranges include 5°C to 75°C (L Series) or 50°C to 235°C (H Series).

A cone calibration is required when:

Depending on your specific workflows, software integration needs, or alternative tracking systems, utilize the designated links below to manage your equipment: Before plugging anything in, you must prepare a

: Choose a cone spindle based on your expected viscosity range (e.g., Cone 01 for lower viscosity).

Requires very small sample volumes, typically less than 1 mL .

: Engineered for advanced thermal applications spanning 50°C to 235°C. Unboxing and Laboratory Benchtop Setup : Standard ranges include 5°C to 75°C (L

Always download manuals from the official manufacturer or authorized distributors. Third-party websites may host outdated or corrupted files. The official manufacturer of the CAP 2000 is Ametek Brookfield .

: Place the instrument on a level surface. Lift it only by the base or column , never by the handle or head.

: For a community-hosted version, you may also visit Scribd . Key Operational Highlights

| Parameter | CAP 2000+ (Low Torque) | CAP 2000+ (High Torque) | |-----------|------------------------|-------------------------| | | 0.2 – 260 Poise (with spindles 01‑05) | 0.2 – 15,000 Poise (full range) | | Shear Rate | 10 – 13,000 s⁻¹ | 10 – 13,000 s⁻¹ | | Speed | 5 – 1000 rpm (995 increments) | 5 – 1000 rpm (995 increments) | | Temperature (L model) | 5 °C – 75 °C | 5 °C – 75 °C | | Temperature (H model) | 50 °C – 235 °C | 50 °C – 235 °C | | Sample Volume | < 1 mL typically | < 1 mL typically | | Industry Standards | ASTM D4287, ISO 2884, BS 3900, GB9751 | Same |