Choose the installation path. By default, this is C:\Program Files\STCamsware\v305 . It is highly recommended to keep this default path. Click "Next".
: Execute the installer file ( .exe ). If prompted by User Account Control (UAC), select Yes .
Intel Core i5 or better (i7 recommended for 16+ cameras).
Supports up to 20fps for specific models, providing smooth live viewing. Pros stcamsware x64 v305 install
StCamSWare x64 is a 64-bit camera control and image acquisition application designed for use with StCam-series industrial cameras. Informer Technologies, Inc.
Windows 7 SP1, 8, 10, or 11 (64-bit only).
: Once finished, click Finish . Note that you must still install the USB driver for the camera to function. 3. USB Driver Installation Choose the installation path
| Issue | Solution | | :--- | :--- | | Software won't start after connecting the camera. | Wait a few moments for the system to recognize the camera, or close and reopen the software. | | "Camera Selection" window appears. | The camera is not connected or the driver is not installed properly. Reinstall the USB driver following the steps above. | | Yellow exclamation mark in Device Manager. | Driver not installed correctly. Use "Update driver" as mentioned above. | | No live image even though software starts. | Ensure the camera is connected to the that was used when you installed the driver. |
Users must accept the terms provided by Sentech America to proceed. Driver Deployment:
: If prompted with a "Custom" installation, select the specific camera drivers or features needed for your hardware. Complete Installation Click "Next"
to completely load the newly installed low-level kernel drivers. Post-Installation Interface Optimization
Once the base framework is deployed, you must link the camera hardware to the specialized Sentech kernel-level driver.